OptiStar CG06 Gun control unit
Electrical data
Mains input voltage |
100-240 VAC |
Operating frequency |
50-60 Hz |
Input power |
40 VA |
Nominal output voltage (to the gun) max. |
12 V |
Nominal output current (to the gun) max. |
1 A |
Ambient temperature range |
0°C - +40°C(+32°F - +104°F) |
Max. operating temperature |
85°C (+185°F) |
Pneumatical data
Compressed air connection |
1/4" male quick release |
Input pressures (must be set in the software) |
5,5 bar |
Max. input pressure |
10 bar / 145 psi |
Min. input pressure (while unit in operation) |
6 bar / 87 psi |
Max. water vapor content of the compressed air |
1.3 g/m³ |
Max. oil vapor content of the compressed air |
0.1 mg/m³ |
OptiStar CG06 Automatic gun control unit - general
OptiStar CG06 Automatic gun control unit - complete 1001 459
OptiStar CG06-C Gun control unit - complete (with CAN bus) 1001 460
OptiStar CG06-CF Gun control unit - complete (with CAN bus / FlowControl) 1001 461
OptiStar CG06-D Gun control unit - complete (with DigitalBus) 1001 462
OptiStar CG06-DF Gun control unit - complete (with DigitalBus / FlowControl) 1001 463
1 Front plate - see corresponding spare parts list
2 Enclosure and power pack - see corresponding spare parts list
3 Rear wall - see corresponding spare parts lists
Shock protection (not shown) 1001 058
Connecting cable (power supply) for the operation with 2 control units (not shown) 1001 867
OptiStar CG06 Automatic gun control unit - inside rear wall
1 Pneumatic group - complete 1001 469
2 Valve cable - CG06 1001 410
3 Washer - Ø 6.4/12.5x1.6 mm 1001 686
4 Lock washer - M3 R 201 880
5 Hexagon nut - M3 202 142
6 Cylinder screw - M3x16 mm 221 074
7 Hexagon screw - M6x30 mm 215 279
8 Fluidizing pad - 1/8"a 237 264
9 Screw-in nipple - 1/8"a, Ø 6 mm 262 315
10 Throttle motor - complete 1000 064
OptiStar CG06 - outside rear wall
Rear wall CG06 - complete 1001 454
1 Rear wall 1000 070
2 Shake proof washer - A type, M6 200 450
3 Milled nut - M6 200 433
4 Screw plug - complete 1001 789
5 Hose connection - complete, Ø 8/6 mm 1001 519
6 Rectus quick release connection - complete 1001 517
7 Lock nut - M18x0.75 mm 1001 799
8 Mains connection CG06 1001 176
9 Washer - Ø 6.4/12.5x1.6 mm 200 476
10 Hexagon nut - M6 200 417
11 Washer - Ø 6.4/12.5x1.6 mm 1001 686
12 Cap screw - M6x10 mm 205 214
13 Gun connection CG06 1001 179
14 Cap screw - M3x8 mm 202 363
15 Cap screw - M3x10 mm 216 739
Protection cap for 2.2 Aux connector socket (not shown) 206 474
Find excellent quality parts of control unit cg06 from one of the largest manufacturers and suppliers - GALIN, which has been dedicated to this field for years. Leveraging on advanced equipment and superior techniques, we can offer you parts of control unit cg06 with high accuracy, high efficiency, reliable performance and long lifespan. Welcome to buy or wholesale our delicate products.